Hilfe
OZ LED – Scheinwerfer-Licht
Stand: 20. Oktober 2026
Kontakt
Fragen, Fehler, Wünsche: schreib einfach eine E-Mail. Es antwortet eine Person, keine Warteschlange, und darum kann es ein paar Tage dauern.
E-Mail: help.vaya (at) web (punkt) deBetreff bitte mit „OZ LED“ beginnen.
Hilfreich in der Nachricht, aber kein Muss: welches iPhone, welche iOS-Version, welche LED-Steuerbox und welche Relais-Boxen, und was du erwartet hättest.
RGB-Licht nur auf Privatgelände. Farbiges oder animiertes Licht nach vorn ist im öffentlichen Straßenverkehr in Deutschland und vielen anderen Ländern nicht erlaubt. Auf der Straße schaltest du die Szenen aus: Dann leuchtet die Leiste weiß.
Häufige Fragen
Welche Hardware brauche ich?
Nachgerüstete RGB-LED-Leisten in den Scheinwerfern mit einer Bluetooth-LE-LED-Steuerbox (Anleitung „LED DMX 00“). Die Steuerbox steuert beide Seiten und hat mit der Zündung immer Strom, auch ohne Handy. Optional kommen zwei Bluetooth-LE-Relais-Boxen dazu (eine je Scheinwerfer): Sie schalten den Blinker zwischen LED-Leiste und Original-Birne um. Die Einrichtung führt dich durch alles: Steuerbox finden, Farbprüfung, Länge der Leiste; danach kannst du die Relais-Boxen koppeln. Ohne Hardware kannst du alles im Demo-Modus ausprobieren.
Wie ist die App aufgebaut?
Es gibt einen Bildschirm für dein Licht: oben dein Auto, das jede Änderung sofort zeigt, darunter der Schalter Szenen, die Helligkeit und die Reihe Szenen · Farben · Effekte. Alle › öffnet die ganze Auswahl. Alles Seltene (Start-Animation, Blinker, Geräte, Widgets, Siri) findest du über das Zahnrad oben rechts unter Einstellungen.
Was ist der Demo-Modus?
Ein simuliertes Auto mit Steuerbox und beiden Relais-Boxen: Szenen, Farben, Effekte, Start- und Blinker-Animation, Nur Originalblinker und Musik. Du startest ihn bei der Einrichtung über Demo starten oder später unter Einstellungen → App → Demo-Modus. Im Demo-Modus sendet die App nichts per Bluetooth.
Warum leuchtet die Leiste weiß, wenn „Szenen“ aus ist?
Die LED-Leiste ist dein Tagfahrlicht und wird nie dunkel. Szenen aus heißt weißes Licht mit 100 %, Szenen an holt dein letztes Licht zurück. Unter Einstellungen → Nach dem Zünden legst du fest, ob die App nach dem Zünden weißes Licht (Standard) oder dein letztes Licht setzt.
Wie richte ich die App ein?
Die Einrichtung führt dich Schritt für Schritt: Steuerbox finden, Farbprüfung, Länge der Leiste und zum Schluss eine Welle als Kontrolle. Bei der Farbprüfung probiert die App die Farbreihenfolge selbst aus und fragt, welche Farbe du siehst. Bei der Länge stellst du die Zahl der LEDs deiner Leiste ein, damit Effekte und Welle sauber laufen. Die Einrichtung startest du später unter Einstellungen → Geräte → Neu verbinden noch einmal.
Die Farben sind vertauscht: was tun?
Zeigt die Leiste zum Beispiel Grün statt Rot, passt die Farbreihenfolge nicht. Wiederhole die Farbprüfung (Einstellungen → Geräte → Farbe und Länge → Farben prüfen) und wähle jeweils die Farbe, die du wirklich siehst. Die App merkt sich das Ergebnis.
LED-Leiste kürzen
Im Zweifel länger lassen – Kürzen lässt sich nicht rückgängig machen. Drei LEDs bilden eine Gruppe. Geschnitten wird nur in der Lücke zwischen zwei Gruppen und nur am Ende ohne Kabel. Die App zeigt die Anleitung auch selbst: bei der Länge unter Leiste zu lang? So kürzt du sie.
- Nur am Ende ohne Kabel schneiden.
- In der Einrichtung bei der Länge mit − und + die Länge einstellen, die bleiben soll. Genau so viele Dreiergruppen leuchten, der Rest bleibt dunkel. Markier die Stelle, etwa mit Klebeband.
- Leiste vom Strom trennen oder Zündung aus.
- Mit einem scharfen Cutter gerade durch Schlauch und Leiste schneiden – mittig in der Lücke nach der letzten leuchtenden Gruppe. Nie in einer Dreiergruppe.
- Die Endkappe mit etwas neutral vernetzendem Silikon abdichten, damit kein Wasser eindringt.
- Wieder anschließen, testen und die Länge mit Übernehmen bestätigen.
Was sind Start-Animation und Blinker-Animation?
Die Steuerbox spielt bei jeder Zündung selbst eine Start-Animation ab, auch ohne Handy, und hat eigene Animationen fürs Blinken. Sie führt dazu eine eigene Liste, deshalb gibt es in der App keine Galerie, sondern Knöpfe: Unter Einstellungen → Start-Animation stehen Nächste Start-Animation und Tempo ändern, zu sehen beim nächsten Zünden. Unter Einstellungen → Blinker schaltet in der Zeile Blinker-Animation der Knopf Nächste weiter, zu sehen beim nächsten Blinken. Jeder Tipp schaltet die Box einen Schritt weiter.
Warum fragt OZ LED nach Bluetooth?
Weil die Steuerbox und die Relais-Boxen nur per Bluetooth erreichbar sind. Die App sendet darüber Steuerbefehle wie Farbe, Helligkeit und Effekt, sonst nichts. Im Hintergrund nutzt sie Bluetooth nur, um sich beim Einschalten der Zündung von selbst wieder zu verbinden. Hast du die Erlaubnis abgelehnt: iOS-Einstellungen → Apps → OZ LED → Bluetooth einschalten.
Was macht „Nur Originalblinker“?
Unter Einstellungen → Blinker schaltest du mit den beiden Relais-Boxen, was blinkt: aus (Standard) die LED-Leiste, an nur die Original-Birne, zum Beispiel für eine Fahrzeugprüfung. Darunter steht der Zustand jeder Seite. Die App setzt deine Wahl bei jeder Zündung wieder, solange das iPhone dabei ist; ohne iPhone stehen die Relais in Ruhe und die LED-Leiste blinkt. Die App ersetzt keine Prüfung: Ob dein Umbau zulässig ist, entscheiden die Prüfstelle und die geltenden Vorschriften.
Wie nutze ich Widgets, Siri und das Kontrollzentrum?
Die Widgets für Home- und Sperrbildschirm zeigen deine Favoriten (Stern) und den Schalter Szenen: Home-Bildschirm lange drücken → Bearbeiten → Widgets hinzufügen → OZ LED. Im Kontrollzentrum gibt es OZ Szenen an/aus und OZ Szene starten. Zu Siri sagst du zum Beispiel „OZ Szenen aus“ (weißes Licht), „OZ Szenen an“, „OZ Polarlicht abspielen“ oder „OZ Nur Originalblinker an“. Alle Befehle stehen auch in der Kurzbefehle-App und unter Einstellungen → Kurzbefehle & Siri. Ist die Steuerbox nicht verbunden, sagt Siri das, statt still nichts zu tun.
Was hört der Effekt „Musik“ mit?
Mit dem Effekt Musik spielt das Licht im Takt. Dafür misst die App über das Mikrofon deines iPhones Lautstärke und Takt, nur solange der Effekt läuft und die App offen ist. Es wird nichts aufgenommen, gespeichert oder gesendet. Die Mikrofon-Erlaubnis wird erst beim ersten Start von Musik erfragt, und alles andere funktioniert auch ohne sie.
Darf ich mit Farben fahren?
In Deutschland nein, und in vielen anderen Ländern auch nicht. Nach vorn ist im Straßenverkehr nur das zugelassene Licht erlaubt. Farben, Effekte und Musik sind für Privatgelände und Treffen gedacht. Auf der Straße: Szenen aus. Bediene die App nicht während der Fahrt.
„Steuerbox nicht gefunden“: was tun?
- Zündung einschalten. Die Steuerbox hat nur mit Zündung Strom.
- Andere Apps für die Steuerbox oder die Relais ganz schließen (aus der App-Übersicht wischen). LED-Steuerbox und Relais-Boxen nehmen nur eine Verbindung gleichzeitig an.
- Bluetooth am iPhone an und für OZ LED erlaubt?
- Mit dem iPhone näher an die Front gehen und Nochmal suchen tippen.
- Hilft das nicht: unter Einstellungen → Geräte → Neu verbinden die Einrichtung noch einmal durchlaufen. Bleibt sie unsichtbar, Stecker und Sicherung der Steuerbox prüfen.
Wo sind meine Daten?
Auf deinem iPhone. OZ LED hat kein Konto, keinen Server und keine Analyse. Szenen und Einstellungen liegen lokal und werden beim Löschen der App mitgelöscht. Details stehen in der Datenschutzerklärung.
Help
This English version is provided for users of the English app localization.
Contact
Questions, bugs, requests: just send an email. One person answers, not a queue, so it can take a few days.
Email: help.vaya (at) web (dot) dePlease start the subject with “OZ LED”.
Useful but not required: which iPhone, which iOS version, which LED controller and relay boxes, and what you expected to happen.
RGB light on private property only. Colored or animated forward-facing light is not allowed on public roads in Germany and many other countries. On the road, turn scenes off: the strip then glows white.
Which hardware do I need?
Retrofitted RGB LED strips in the headlights with a Bluetooth LE LED controller (manual “LED DMX 00”). The controller drives both sides and always has power with the ignition, even without a phone. Optionally, add two Bluetooth LE relay boxes (one per headlight): they switch the turn signal between the LED strip and the original bulb. The setup guides you through everything: find the controller, color check, strip length; then you can pair the relay boxes. Without hardware you can try everything in demo mode.
How is the app organized?
One screen for your light: your car at the top, showing every change right away, then the Scenes switch, brightness and the row Scenes · Colors · Effects. All › opens the full choice. Everything you need less often (welcome animation, turn signal, devices, widgets, Siri) is behind the gear at the top right, under Settings.
What is demo mode?
A simulated car with the controller and both relay boxes: scenes, colors, effects, welcome and turn-signal animation, original turn signals only and Music. Start it during setup with Start demo or later under Settings → App → Demo mode. In demo mode the app sends nothing over Bluetooth.
Why does the strip glow white when “Scenes” is off?
The LED strip is your daytime running light and never goes dark. Scenes off means white light at 100 %, Scenes on brings back your last light. Under Settings → After ignition you choose whether the app sets white light (default) or your last light after ignition.
How do I set up the app?
The setup guides you step by step: find the controller, color check, strip length and a final wave as a check. In the color check the app tries the color order by itself and asks which color you see. For the length you set the number of LEDs on your strip so effects and the wave run cleanly. You can run the setup again under Settings → Devices → Reconnect.
Colors are swapped: what now?
If the strip shows green instead of red, for example, the color order does not match. Repeat the color check (Settings → Devices → Color and length → Check colors) and pick the color you really see. The app remembers the result.
Shortening the LED strip
If in doubt, leave it longer – a cut can't be undone. Three LEDs make one group. Only cut in the gap between two groups, and only at the end without the cable. The app shows these steps too: at the length step, under Strip too long? Here's how to shorten it.
- Only cut at the end without the cable.
- At the length step of the setup, use − and + to set the length you want to keep. Exactly that many groups of three light up, the rest stays dark. Mark the spot, for example with tape.
- Disconnect the strip from power or switch the ignition off.
- Cut straight through tube and strip with a sharp cutter – in the middle of the gap after the last lit group. Never inside a group of three.
- Seal the end cap with a little neutral-cure silicone so no water gets in.
- Reconnect, test, and confirm the length with Apply.
What are welcome and turn-signal animation?
The controller plays a welcome animation by itself at every ignition, even without a phone, and has its own animations for flashing. It keeps its own list, so the app has no gallery but buttons: under Settings → Welcome animation you find Next welcome animation and Change speed, visible the next time you start the car. Under Settings → Turn signal, the row Turn signal animation has the button Next, visible at the next flash. Each tap steps the controller one further.
Why does OZ LED ask for Bluetooth?
The controller and the relay boxes can only be reached over Bluetooth. The app sends control commands such as color, brightness and effect, nothing else. In the background it uses Bluetooth only to reconnect when the ignition is switched on. If you declined: iOS Settings → Apps → OZ LED → Bluetooth.
What does “Original turn signals only” do?
Under Settings → Turn signal the two relay boxes switch what flashes: off (default) the LED strip, on only the original bulb, for example for a vehicle inspection. The state of each side is shown below. The app sets your choice again at every ignition while the iPhone is in the car; without the iPhone the relays rest and the LED strip flashes. The app does not replace an inspection: whether your modification is permitted is decided by the inspection body and local regulations.
How do I use widgets, Siri and Control Center?
The Home Screen and Lock Screen widgets show your favorites (star) and the Scenes switch: touch and hold the Home Screen → Edit → Add Widget → OZ LED. In Control Center you can add OZ Scenes on/off and Start OZ scene. Ask Siri for example “OZ LED scenes off” (white light), “OZ LED scenes on”, “Play Aurora in OZ LED” or “OZ LED original turn signals on”. All commands are also in the Shortcuts app and under Settings → Shortcuts & Siri. If the controller is not connected, Siri tells you instead of silently doing nothing.
What does the Music effect listen to?
With the Music effect the light plays to the beat. To do this, the app measures loudness and beat through your iPhone’s microphone, only while the effect is running and the app is open. Nothing is recorded, stored or sent. Microphone permission is requested the first time you start Music, and everything else works without it.
May I drive with colors on?
Not in Germany, and not in many other countries either. Only approved lighting is allowed to the front on public roads. Colors, effects and Music are meant for private property and meets. On the road: scenes off. Do not operate the app while driving.
“Controller not found”: what now?
- Switch the ignition on. The controller only has power with the ignition on.
- Fully close any other app for the controller or the relays (swipe it away in the app switcher). The controller and relay boxes accept only one connection at a time.
- Is Bluetooth on and allowed for OZ LED?
- Move closer to the front of the car and tap Search again.
- Still nothing: run the setup again under Settings → Devices → Reconnect. If it stays invisible, check the controller’s plug and fuse.
Where is my data?
On your iPhone. OZ LED has no account, no server and no analytics. Scenes and settings are stored locally and deleted together with the app. Details are in the privacy policy.